WINGUM PLUS H2O REFLEX
Water-based waterproofing agent with top quality modified resins.
Ready to use
Resistant to water stagnation
Resistant to UV rays
No Needed Primer
Is a white elastomeric liquid and waterproofing membrane with special additives and charges that gives to the product high solar reflection and emissivity in infrared.
It offers extraordinary resistance to water stagnation, weathering and UV rays.
It is the ideal solution for complex waterproofing works on large surfaces and guarantee excellent durability.
Apply the product in 2 coat (between the 1 and the 2 hand wait at least 24h).
It is advisable to give the first hand with Wingum Plus H2O and the second one with Wingum Plus H2O Reflex if you need to create an anticorrosive system.
This product can be used to cool building structures or to increase the operation of solar panels installed on the roofs thanks to the high solar reflection and infrared emissivity the product has.
WHERE TO APPLY
Covering with photovoltaic systems
It can be applied over prepped dry surfaces with: Roll Brush Large paintbrush Airless spray gun
Average collective consumption when applied in two coats with Wintechno Mat (Field Polyester Reinforcement Mat) is: 3.3 Gal. per 100 Sq. Ft.
APPROXIMATE COVERAGE PER PAIL:
120 - 135 SF (11 – 12.5 m²) in two coats with Wintechno Mat interposed
44 Lbs. (20 kg)
3.9 gallons per pail
To apply the product: Clean and dry the surface. In the edges of the surface to be treated apply the waterproof BC Seal Band Seal drains with BC Seal PAD Any joints should be treated with Winjoint Band To maintain reflection characteristics use Win Clean as a protective applied at least 24 hours after the second hand of H2o Reflex. For application on metal surfaces, a 300g hand of Wingum Plus H2O is recommended as a corrosion inhibitor
Technical data sheet