WINGRIP BITUMINOSO

Waterproofing under tile Liquid Membrane for bathrooms, balconies, terraces, shower pans and more.

FEATURES

Ready to use
One coat only
Fiberized (no net is required)
Act as a Bonding Agent (primer is not required)
Long Pot Life
Waterbased
Effective cost
VOC Zero

DESCRIPTION

Bitumious polymeric waterproofing and adhesion-promoting liquid applied membrane with special aggregates in water emulsion.

Ready to use product with an enviromental impact virtually reduced to zero.
Specifically developed to create an elastic and highly resistant waterproofing and bonding-promoting sub-strate layer on horizontal and vertical settings.

An ideal product for waterproofing and adhesion-promoting.

WHERE TO APPLY

This Product can be applied on:
Tiles
Porcelain Tiles
Concrete

    array(1) { [0]=> string(1) "1" }
  • Application You can apply over prepped dry surfaces with: a brush a roller large brush and airless spray gun This Product need just One Coat
  • Consumption
    AVERAGE CONSUMPTION
    1 – 2.02 Gal /100 SF (0.5 - 1 Kg / m2) With horizontal application for two coats depending on the porosity of the substrate. With vertical application is require 20% less material than horizontal applications.
    APPROXIMATE COVERAGE PER PAIL
    214 - 433 SF (20 – 40.2 m2) horizontal applications in two coats VOLUME: 4.33 Gallons PACKAGING: 4.3 gallons per pail WEIGHT: 44 Lbs. (20 kg)
  • Useful Advices The application rate may vary depending on: Substrate profile / porosity, weather, method of application, etc. Apply at ambient and substrate temperatures between 41F and 104F (+5°C and +35°C).
    STORAGE
    Product can be stored for 12 months When kept in its sealed, undamaged package in a shaded covered place at temperatures between 41F and 95F (+5°C and +40°C)
  • Technical data sheet
  • Certifications
  • Declaration of performance WINGRIP BITUMINOSO