WINGRIP NEXT

WINGRIP NEXT is a ready-to-use adhesion promoter of extraordinary tenacity, based on water-dispersed resins and siliceous inert materials. WINGRIP NEXT is an exceptional bonding primer that guarantees optimal adhesion on any cement, gypsum, or lime-based mix, on various substrates: concrete, cellular concrete, gypsum, plasterboard, bricks, stone, masonry, ceramics, wood, insulating panels, as well as on oxidizable metals.

WINGRIP NEXT can be applied both indoors and outdoors.
The product is ready-to-use and very easy to apply. It does not require the substrate to be pre-wet, and it is possible to apply a coating over the bonding primer after just two hours or even a few months later.

    array(1) { [0]=> string(1) "1" }
  • Use Fields WINGRIP NEXT can be used as a "WET-ON-WET" adhesion promoter for bonded or self-leveling screeds, even on substrates with uneven water absorption. It also ensures strong adhesion of plasters (maximum thickness of 2 cm) and skim coats. It is ideal as a bonding layer for cement adhesives before laying floors or wall coverings in overlap, as an insulator for gypsum and plasterboard (gypsum board), and to improve adhesion of skim coats on insulation panels for external insulation systems (ETICS). By preventing the absorption of the water mix, it is exceptional for low-thickness skim coats on facades, cornices, or pillars.
  • Application WINGRIP NEXT can be applied with a brush, broad brush, roller or airless pump. Apply in a single coat, ensuring the surface to be evenly covered. In case of application on crumbly surfaces, a prior application of WINFIX CONCRETE is recommended to promote adhesion.
  • Consumption 300 g/m² in a single coat. Wet-on-wet: 500 g/m².
  • Surface Preparation Clean the substrate thoroughly to remove dust, friable parts, foreign substances, or anti-adhesive materials. Apply the product on a dry surface, and check for hidden moisture in the substrate.
  • Useful Advices Do not apply on surfaces subject to water pooling. Ensure that the application surfaces are clean, dry, and free from friable parts, oils, greases, waxes, and anti-adhesive substances. Apply at temperatures between 5°C and +35°C. For the construction of bonded screeds, including self-leveling ones, it is recommended to overlap the fresh product. In all other cases, wait at least two hours for complete drying. For plastering, do not exceed a thickness of 2 cm.
  • Packaging Available in 5, 10 and 20 kg buckets.
  • Colours Available in white / gray.
  • Storage The product, when stored in its original, unopened packaging in a cool and dry place, has a shelf-life of 12 months. Storage at temperatures between +5°C and +35°C. No frost-proof.
  • Technical data sheet
  • Certifications