Fast-setting cement-based two-component waterproofing bond. Highly strong and elastic product made specifically for laying and overlapping ceramic floors both outdoors (balconies, swimming pools etc.) and indoors (bathrooms, kitchens etc.) Thanks to its resistanceto vertical slip, BOND CEMENT can be used both horizontally and vertically, for example, to bond shower trays and to lay and waterproof bathroom coatings. It does not need reinforcement mesh and is applied in just one coat. BOND CEMENT can be applied on both screeds and pre-existing floors. CLASSIFICATION IN LINE WITH EN 12004 C2TES1 

Mix components A and B to achieve an even blend. Apply BOND CEMENT with a spatula, first with the smooth side and then making grooves with the toothed side. Be sure to create a continuous and uniform layer to ensure that the back of the tile is fully wetted and guarantees the waterproofing performance.

3.5 kg/m2 in only a coat

Mix by means of low-speed drill. Protect it from washout and rainfall for 24 hours after application. Add ADEGUM LATEX to the water of the stucco mix to fill runouts. Before laying any waterproof product, please check for underlying damp (see technical sheets) to avoid scaling and superficial blisters due to vapour pressure. Apply it at temperatures between +5°C and +35°C.

PACKAGING

Two-component - 20 kg pails (A+B)

STORAGE

The product has 12 months stability if properly packed and stored in a cool dry place. No frost-proof. Store it at temperatures between +5°C and +35°C.